*Table and Cartridge Setup

Advice for tuning and tweaking your table, arm and cartridge.

Turntable Setup Guide Part 1: Updated

Robert Brook runs a blog called The Broken Record, with a subtitle explaining that the aim of his blog is to serve as:

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

We know of none better, outside of our own humble attempt to enlighten that portion of the audiophile community who love hearing music reproduced with the highest fidelity and are willing to go the extra mile to make that happen.

Here is Robert’s latest posting.

Turntable Setup Guide Part 1: UPDATED

Nothing will bring you as much joy as when you manage — by whatever means, probably against all odds — to make significant audio progress. (Just ask our good friend Bill S. how he feels about his stereo sounding so much better.)

The more progress you make, the more enjoyment you will get from your favorite music.

(more…)

Proper VTA Is Essential to Getting the Sound of Benny’s Muted Trumpet Right

Hot Stamper Pressings of Contemporary Jazz Albums Available Now

For us audiophiles both the sound and the music here are enchanting. If you’re looking to demonstrate just how good a 1959 All Tube Analog recording can sound, this killer copy will do the trick.

The sound of the muted trumpet on side two is out of this world.

It has exactly the sonic signature of good tube equipment — the ability to make some elements of a recording sound shockingly real. There are tradeoffs with tube mastering to be sure, a subject we discuss in some depth here.

The trumpet is also a very good test for turntable setup, tracking, as well as arm and cartridge compatability. You’ve got to be set up properly for every aspect for a difficult-to-reproduce instrument like the trumpet to sound right.

Accurate VTA adjustment is critical to the record reproduction. If you do not have an arm that allows you to easily adjust its VTA, then you will just have to do it the hard way (which normally means loosening a set screw and moving the arm up and down until you get lucky with the right height).

Yes, it may be time consuming, it may even be a major pain in the ass, but there is no question in my mind that you will hear a dramatic improvement in the sound of your records once you have learned to precisely adjust the VTA for each and every one of them.

VTA is not a corner anyone should be cutting.

Careful adjustment of VTA is critical to getting good sound.

Of course, so are anti-skate, azimuth and tracking weight.

(more…)

“Robert directly improved my stereo to achieve levels of sonic performance I didn’t think were possible.”

One of our good customers has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

Bill, who also happens to be a very good customer of ours, recently had Robert Brook over for a visit to help him tweak and tune his setup.

The changes Robert was able to make to Bill’s system took it to the next level, or maybe even the one that comes after that. There are a lot of levels in audio!

As Bill said, even with a $6k phono stage and other comparably expensive equipment, the sound was still just OK.

Tedious, painstaking setup is the only thing that can make all that fancy equipment sound good, and Robert was the man with the patience to help out a friend who needed some guidance.

The magazines and the websites don’t talk much about these things, but we here at Better Records know that high fidelity sound is simply not possible without learning how to do the work and sweating all the details.

“TRANSFORMED MY SYSTEM from OK to GREAT!”

I only know of three people who followed my audio advice: Robert, Bill and Aaron, all of whom can be seen in the picture below.

For years I’ve been banging on about Legacy speakers, low-power transistor integrated amps, EAR 324p phono stages, Triplanar tonearms, 17dx cartridges, VPI turntables, Super Platters and motor controllers, Townshend Seismic Platforms, Hallographs, suspended cables, clean electricity, and the kind of tuning and tweaking that can take your system beyond where you thought it could go.

Even buying all this stuff used, the resulting system would still end up being a few tens of thousands of dollars. That said, I honestly don’t think you can achieve this level of sound with standard audiophile equipment, the kind you might see in a showroom or advertised on websites, at any price*.

(more…)

Helplessly Hoping to Get the VTA Right

Hot Stamper Pressings of the Music of Crosby, Stills, Nash and (Sometimes) Young

This listing from 2005 (!) contains commentary about VTA adjustment using the track Helplessly Hoping from a Hot Stamper pressing of CSN’s So Far. It would not be long before we went with the much more accurate and revealing 17D (first the 17D3, then the 17DX), which took us to another level, as documented here.

Helplessly Hoping is a wonderful song that has a lot of energy in the midrange and upper midrange which is difficult to get right. Just today (4/25/05) I was playing around with VTA, having recently installed a new Dynavector DV-20x on my playgrading table (a real sweetheart, by the way), and this song showed me EXACTLY how to get the VTA right.

VTA is all about balance.

The reason this song is so good for adjusting VTA is that the guitar at the opening is a little smooth and the harmony vocals that come in after the intro can be a little bright. Finding the balance between these two elements is key to getting the VTA adjusted properly.

When the arm is too far down in the back, the guitar at the opening will lose its transparency and become dull and thick. Too high in the back and the vocals sound thin and shrill, especially when the boys all really push their harmony. The slightest change in VTA will noticeably affect that balance and allow you to tune it in just right.

To be successful, however, there are also other conditions that need to be met. The system has to be sounding right, which in my world means good electricity, so make sure you do this in the evening or on a weekend when the electricity is better.

That’s the easy part. The hard part is that you need a good pressing that includes this song, and those don’t grow on trees.

The vast majority of CSN’s first album and the vast majority of So Far’s are junk.

Trying to get junk pressings to sound right is impossible, because they weren’t mastered right in the first place.

But if you’re one of the lucky few who has a good pressing of Helplessly Hoping, try tweaking your VTA adjustment and see if you aren’t able to dial it in even better than before.

(more…)

Super Session Is the Poster Boy for Gritty, Spitty Vocals

Hot Stamper Pressings of the Music of Al Kooper Available Now

Man’s Temptation, track 3 on side one, has got some seriously bright EQ happening (reminiscent of the first BS&T album, Child Is Father to the Man), so if that song even sounds tolerable in the midrange you are doing better than expected.

Bright, gritty, spitty, edgy, harsh, upper-midrangy vocals can be a real problem on this album.

The Red Labels tend to have more problems of this kind, but plenty of original 360 pressings are gritty and bright too. Let’s face it, if the vocals are wrong, the music on this album — like any rock and pop album — pretty much falls apart.

Most copies are far too bright and phony sounding to turn up loud; the distortion and grit are just too much at higher volumes.

On the better copies, the ones with more correct tonality and an overall freedom from distortion, you can crank the volume and let Super Session rock.

Testing with Super Session

This record, along with the others linked below, is good for testing the following qualities.

  1. Grit and grain
  2. Midrange tonality
  3. Sibilance (it’s a bitch) 
  4. Upper midrange brightness

Playing so many records day in and day out means that we wear out our Dynavector 17DX cartridges often, three or four times a year.

Which requires us to regularly mount a new cartridge in our Triplanar arm.

Once a new cartridge is broken in (50 hours minimum), we then proceed to carry out the fine setup work required to get it sounding its best. We do that by adjusting the VTA, azimuth and tracking weight for maximum fidelity using recordings we have been playing for decades and think we know well.

(more…)

Azimuth – A Little Can Make a Lot of Difference

Robert Brook runs a blog called The Broken Record, with a subtitle explaining what the aim of his blog is:

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

We know of none better, outside of our own humble attempt to enlighten that portion of the audiophile community who love hearing music reproduced with higher fidelity and are willing to go the extra mile to make that happen.

Here is Robert’s latest posting. He recently spent some time with our favorite recording of the Beethoven First Piano Concerto, and needless to say, he’s glad he did.

AZIMUTH: A LITTLE Can Make A LOT of Difference!

You may enjoy our piece on azimuth and other aspects of turntable setup in this posting from many years ago.

Lately we have been writing quite a bit about how pianos are good for testing your system, room, tweaks, electricity and all the rest, not to mention turntable setup and adjustment.

(more…)

Even Shootouts Won’t Teach You What You Can Learn from Variations in Your Table Setup

Hot Stamper Pressing of the Music of Joni Mitchell Available Now

As anyone familiar with album knows, Court and Spark has loud vocal choruses on a number of tracks. More often than not, during the loudest sections they sound like they are either breaking up or threatening to. This quality of “almost breaking up” is most easily heard on Down to You.

I always assumed it was compressor or board overload. But on the best of the best copies there doesn’t seem to be any breakup — the voices get loud and stay clean throughout.

Which means that instead of being on the master tape, it might be compressor distortion that is occurring during the mastering.

Regardless of the source of the distortion, or lack thereof, the loudest choruses are a tough test for any system.

Setup Advice

If you have one of our hottest Hot Stampers, try adjusting your setup — VTA, Tracking Weight, Azimuth, Anti-Skate — Especially! Audiophiles often overlook this one, at their peril — and note how cleanly the loudest passages play using various combinations of settings.

Keep a yellow pad handy and write everything down step by step as you make your changes, along with what differences you hear in the sound.

You will learn more about sound from this exercise than you can from practically any other. Even shootouts won’t teach you what you can learn from variations in your table setup.

And once you have your setup dialed in better, you will find that your shootouts go a lot smoother than they used to.

(more…)

Cartridge Break-In and Setting Azimuth

Robert Brook runs a blog called The Broken Record, with a subtitle explaining that the aim of his blog is to serve as:

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

We know of none better, outside of our own humble attempt to enlighten that portion of the audiophile community who love records and are looking to understand them better.

Here is one of Robert’s most recent postings.

Cartridge BREAK-IN and Setting AZIMUTH

More of Robert’s advice on equipment and setup:

(more…)

Speakers Corner Peer Gynt Reviewed, with Handy VTA Advice

Hot Stamper Pressings of the music of Edvard Grieg Available Now

Sonic Grade: C+

The Fjeldstad has long been one of our favorite performances of Peer Gynt here at Better Records. 

This record is handy for VTA set-up as well, a subject discussed below in our listing from 2010.

The sound is excellent for a modern reissue*, but in the loudest sections the orchestra can get to be a bit much, taking on a somewhat harsh quality. (The quieter passages are superb: sweet and spacious.)

So I adjusted the VTA a bit to see what would happen, and was surprised to find that even the slightest change in VTA caused the strings to lose practically all their rosiny texture and become unbearably smeared.

This is precisely why it’s a good heavy vinyl pressing for setting up your turntable.

If you can get the strings to play with reasonably good texture on this record you probably have your VTA set correctly.

VTA

Correct VTA adjustment for classical records (as well as all other kinds of records) is critical to their proper reproduction. If you do not have an arm that allows you to easily adjust its VTA, then you will just have to do it the hard way (which normally means loosening a set screw and moving the arm up and down until you get lucky with the right height).

Yes, it may be time consuming, it may in fact be a major pain in the ass, but there is no question in my mind that you will hear a dramatic improvement in the sound or your records once you have taken the time to correctly set the VTA, by ear, for each and every record you play.

We heard the improvement on this very record, and do on all the classical LPs (and all other kinds of records) we play.

The Big Caveat

As for the asterisk (*) above, it concerns the caveat “…for a modern reissue…” What exactly do we mean by that? Allow us to reprint what we wrote about another Heavy Vinyl classical pressing, one that we actually used to like.

(more…)

Go Nude for Even Better Sound

Robert Brook runs a blog called The Broken Record, with a subtitle explaining what the aim of this blog is:

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

We know of none better, outside of our own humble attempt to enlighten that portion of the audiophile community who love hearing music reproduced with higher fidelity and are willing to go the extra mile to make that happen.

Nothing will bring you as much joy as when you manage, by whatever means, probably against all odds, to make significant audio progress.

The more progress you make, the more you will enjoy your favorite music. At least that’s what happened to me over the course of the last fifty years as I set about working on my system, room and a great deal more.

Here is Robert’s latest posting.

“NUDE” Your Dynavector KARAT 17DX Cartridge for EVEN BETTER Sound

More on Robert’s system here. You may notice that it has a lot in common with the one we use. This is not an accident.

And it is also no accident that these two systems just happen to be very good at showing their owners the manifold shortcomings of the modern remastered LP, as well as the benefits to be gained by doing shootouts in order to find dramatically better sounding pressings to play.

(more…)