brook-equipment

The Townshend Seismic Platform: Essential in Analog Playback

Robert Brook has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

The Townshend Seismic Platform: ESSENTIAL in ANALOG Playback

Robert mentions that his original commentary for the Seismic Platform has been lost. Here is what’s left of it.

I shared my story of starting out with the ‘bladder” version of the sink (now called a platform) back in the early 2000s, noting what a pain it was and how the amount of air in each of the three bladders changed the sound of the turntable.

Fortunately, those days are gone. It is now set and forget (although, like everything else in audio, you need to tweak it a bit to get the most benefit from it). You can contact Townshend for pricing and the cost of shipping direct to you, no middleman (that used to be us!) involved. We cannot recommend any piece of audio gear more highly.

(Please note that we do not make a dime from this product. We want you to buy them — yes, ideally you’re going to need more than one — so that your stereo can show you just how much better our vintage vinyl pressings are when directly compared to any and all others.)

Some background:

A few years back I discovered something wonderful about the Seismic Sink I was using under my turntable to control vibration. In our experience, vibration control is one of the most important revolutionary advancements in audio of the last twenty years or so. This commentary should help to give your tweaking efforts more context.

(more…)

The Fascinating Lifecycle of Our Stereo Cartridge

Robert Brook runs a blog called The Broken Record, with a subtitle explaining what the aim of his blog is:

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

We know of none better, outside of our own humble attempt to enlighten that portion of the audiophile community who love hearing music reproduced with the highest fidelity and are willing to go the extra mile to make that happen.

The FASCINATING LIFECYCLE of Our Stereo CARTRIDGE

An excerpt:

Whatever the number of hours our cartridge will last, and however long we can expect it to perform well, I’d say most of us who do avoid breaking it will run it too long. Which is completely understandable and not totally without its merits. Great cartridges are expensive and the degradation of their sound is often gradual and not necessarily universal across every record in our collection. Plus it’s really not all that easy to know exactly when our cartridge is starting to sound audibly worse.

So how do we know when it’s time to replace our cartridge? Before I answer that question I need to point out that audiophiles are too focused on stylus wear and not enough on degradation of the cantilever assembly, which plays a sizable role in the quality of sound our cartridge delivers.

As Robert makes clear in his piece, a properly setup, fresh-sounding cartridge is fundamental to achieving high quality playback.

In both his system and mine, it starts with this little fellow right here.

If you are interested in acquiring what we consider to be the best sounding cartridge on the market, please contact us. We are dealers for Dynavector and can get you a 17dx at a good price, and typically in short order.

(more…)

One Man’s Experimental Approach to Audio Reveals Some Inconvenient Truths

Here Are Some of Our Favorite Orchestral Test Discs

UPDATE 2025

The following was originally posted by Robert in 2020. We have added a link at the top to test discs that we’ve found to be good for tweaking and tuning your system, room, electricity and such like.

Robert has also reviewed a fair number of difficult to reproduce orchestral recordings, titles that are sure to challenge the playback quality of any system. They should make it easy to hear whether the changes you make are actually getting closer to sound that is more like live, unamplified music, which, from our point of view, should be the goal of any audiophile.

This is the one true test for any system.

Here’s an especially good test disc to get you started.

POWER CORDS: Is THIS the Difference You Want?

Robert Brook has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

Below is a link to a comparison Robert Brook carried out with a group of power cords he had on hand. I did the same thing about fifteen twenty years ago and it taught me a lot (although strangely in my case I’ve never taken the time to write about it, mostly because my notes are long gone).

The experience he went through is instructive and easily replicated by anyone for any system. The benefits are likely to be substantial, maybe even life-changing. (Robert has had many life-changing experiences with audio and music since this was written, and we couldn’t be happier that we played some small part in the evolution he underwent.)

(more…)

“Robert directly improved my stereo to achieve levels of sonic performance I didn’t think were possible.”

One of our good customers has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

Bill, who also happens to be a very good customer of ours, recently had Robert Brook over for a visit to help him tweak and tune his setup.

The changes Robert was able to make to Bill’s system took it to the next level, or maybe even the one that comes after that. There are a lot of levels in audio!

As Bill said, even with a $6k phono stage and other comparably expensive equipment, the sound was still just OK.

Tedious, painstaking setup is the only thing that can make all that fancy equipment sound good, and Robert was the man with the patience to help out a friend who needed some guidance.

The magazines and the websites don’t talk much about these things, but we here at Better Records know that high fidelity sound is simply not possible without learning how to do the work and sweating all the details.

“TRANSFORMED MY SYSTEM from OK to GREAT!”

I only know of three people who followed my audio advice: Robert, Bill and Aaron, all of whom can be seen in the picture below.

For years I’ve been banging on about Legacy speakers, low-power transistor integrated amps, EAR 324p phono stages, Triplanar tonearms, 17dx cartridges, VPI turntables, Super Platters and motor controllers, Townshend Seismic Platforms, Hallographs, suspended cables, clean electricity, and the kind of tuning and tweaking that can take your system beyond where you thought it could go.

Even buying all this stuff used, the resulting system would still end up being a few tens of thousands of dollars. That said, I honestly don’t think you can achieve this level of sound with standard audiophile equipment, the kind you might see in a showroom or advertised on websites, at any price*.

(more…)

Others May Help, But Most of the Time We Make Our Own Mischief

Robert Brook runs a blog called The Broken Record, with a subtitle explaining that the aim of his blog is to serve as:

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

We know of none better, outside of our own humble attempt to enlighten that portion of the audiophile community who love records and are looking to understand them and reproduce them better.

Here is Robert’s latest posting. I changed the title a bit from his, since the dictionary definition of the term mischief-making implies “deliberately creating trouble for other people,” and it is not quite right that the purveyors of these products are in any way purposely going about screwing up the sound of perfectly good stereos.

The way I see it, these products are designed to do something positive for some stereos under some conditions when playing some recordings for audiophiles who prize some qualities more than others.

Knowing what these kinds of things are doing, on what kinds of stereos, under what operating conditions, when playing what specific recordings, for what sound qualities a particular audiophile might be listening for, is more than the work of a lifetime. It is, in fact, impossible.

ISOACOUSTICS and the Un-MAKING of Audio MISCHIEF

After reading Robert’s story, I was inspired to write a long piece detailing my own lessons learned as I first embraced, then rejected, one tweak or piece of gear after another, starting in 1975 or thereabouts. (Many such stories are chronicled here. The picture of me you see was taken in the late-70s. I was in an audio cult at the time, but, of course, like today’s similarly-situated audiophiles, I had no way of knowing it.)

I am still working on the commentary mentioned above, but I expect it should be ready before long. The short version goes like this:

Dramatic limitations and massive amounts of colorations are endemic to home audio systems.

The only way to get rid of them is by doing the unimaginably difficult work it takes to learn how to identify them and then figure out ways to root them out.

This, in my experience, is a process that will rarely be accomplished, even by the truly dedicated. It unfolds slowly, over the course of decades, and only for a very small percentage of audiophiles. Most will simply give up at some point and choose to enjoy whatever sound quality they have managed to achieve up to that time. To attempt to go further feels like banging your head against a wall.

To push on in this devilishly difficult hobby we have chosen for ourselves is for the few, not the many.

(It helped that we got paid to do it. An undiagnosed but all-too-real obsessive personality disorder also played a part, as did certain records that I fell in love with a long time ago.)

The completed post can be found here.

(more…)

Testing with Good Records Is the Only Kind of Testing that Works

Robert Brook runs a blog called The Broken Record, with a subtitle explaining what the aim of this blog is:

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

We know of none better, outside of our own humble attempt to enlighten that portion of the audiophile community who love records and are looking to understand them better.

Here is Robert’s latest posting.

FERRITES and the Limits of SCIENCE (theory?) in AUDIO

More on Robert’s system here. You may notice that it has a lot in common with the one we use. This is clearly not an accident.

And it is also no accident that these two systems just happen to be very good at showing their owners the manifold shortcomings of the modern remastered LP, as well as the benefits to be gained by doing shootouts in order to find dramatically better sounding pressings to play.

(more…)

We Love Our Triplanar Arm as Much as Robert Brook Loves His, Which Is a Lot

One of our good customers has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

In the listing below, Robert Brook recommends you buy a Triplanar tonearm. So do we. If you would like one, as dealers for this wonderful arm we may be able to help, although it typically takes about a year to get one since they are handbuilt to order. Worth the wait I say!

I hope to write a bit about getting my first Triplanar back in the late-90s, a life-changing event in my evolution as an audiophile.

Once I had learned how to dial in the VTA adjustment for every record I played, I quickly discovered that I was able to operate at a completly different level.

This is a sophisticated piece of equipment with very fine adjustments for every aspect of playback. I confess it actually took me about five years to be in full control of all the ins and outs of the Triplanar. The more I experimented with the settings, the more I learned and the better I could play records.

In 2005 I made a breakthrough while working with a favorite Borodin record I had been trying and failing to get to sound right. I wrote about the hours I spent adjusting the azimuth, VTA, anti-skate and tracking weight for that record, and what dramatic improvements resulted from my efforts all those years ago.

If you don’t have an arm of this quality, or don’t know how to adjust it for every record you play, it is our belief that you have not begun to hear how good your records can sound.

The TRIPLANAR MK VII is at the PINNACLE OF PERFORMANCE

More on Robert’s system here. You may notice that it has a lot in common with the one we use.

Robert has approached the various problems he’s encountered scientifically, methodically and carefully, along these three fronts:

(more…)

A Loaded Seismic Sink and the Remarkable Benefits of Testing and Tuning

Robert Brook has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

Below is a link to the review he’s written for one of our favorite ways to improve the sound of any stereo, the Townshend Seismic Platter.

LOADING the TOWNSHEND SEISMIC PLATTER Brings Your SYSTEM TO LIFE!

A few years back I discovered something wonderful about the Seismic Sink I was using under my turntable to control vibration.

In our experience, vibration control is one of the most important revolutionary advancements in audio of the last twenty years or so.

This commentary should help to give your tweaking efforts more context.

(more…)

Robert Brook Gets Mugged by an Audio Reality

A fellow audiophile, who also happens to be a friend and good customer, has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

He recently made an attempt to hear for himself a speaker that others had spoken of highly. He was able to take part in two demos at the homes and offices of “passionate” audiophiles selling the speaker in question — stereo showrooms being a thing of the past — as well as lots of other high-end equipment.

Let’s just say that all did not go as well as Robert had hoped.

On the bright side, he now has a newfound appreciation for the listening skills, or lack thereof, of some of the folks in our hobby.

Spatial Audio Lab M3 Sapphires: NOT a Review!

This youtube demonstration of the speakers is worth watching, or at least skimming through, which is about all I could manage. I’ve added some of my own comments at the end of Robert’s review which you may find interesting.

One quick note: the monstrous Legacy Whisper speaker system I used to own had a similar design, with four 15″ woofers per side in an open baffle array. It did some things I have never heard any other speaker do, and the free-air design no doubt was a big part of its remarkable ability to move air with great speed and authority above a hundred cycles or thereabouts.

Below that, not so much, which turns out to be a problem that is very difficult to solve.

It was fun while it lasted, but it had too many shortcomings, shortcomings its little brother, the Legacy Focus, I discovered to my endless joy, did not have. The Focus sounds right to us in every way, which is why it is our reference speaker and will likely remain so far into the future.

I freely admit that there are surely better speakers in the world. I just have not heard them.

(more…)

The Townshend Seismic Isolation Platform Is Key to Better Orchestral Playback

Robert Brook has a blog which he calls

A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE

Below is a review Robert Brook wrote for one of our favorite tweaks. We have most — but not all — of our equipment sitting on one of these stands. We were big fans of the earlier model all the way back in the early 2000s, the kind that had three air bladders inside for isolation. You had to pump air into with a bicycle pump.

Those Cursed Bladders

The unfortunate aspect of that design was the fact that the amount of air in the bladders had a profound effect on the sound quality of the system. We would pump the thing up, and then listen, and if the sound wasn’t right we would let some air out. We would do this a couple of times, and if the sound refused to get better, we would pump the thing up and start the process all over again.

For every shootout.

The air pressure changed during the day with the heat, and the bladders did not hold air all that well, so you had to do a lot of pumping and air releasing if you wanted to get the best sound.

Crazy, huh? And that’s in combination with all the VTA adjustments that were needed for each title.

(more…)