Robert Brook runs a blog called The Broken Record, with a subtitle explaining that his blog is:
A GUIDE FOR THE DEDICATED ANALOG AUDIOPHILE
Some excerpts:
Your Hot Stampers will sound WAY better when you get your turntable set up right, isolate it properly and get the equipment you need to make the speed of your platter accurate and stable. And that’s because all of these system improvements are highly effective ways of reducing distortion and its effects on your system.
Aside from our records, our analog front end, our amp and our speakers, our electricity and its effects on our equipment represents yet one more source of distortion in our system. I’ve posted more than one article touching on this issue, and I have shared the ways in which I’ve learned to manage the electricity powering my gear.
When I posted my last article on electricity, I was convinced that improving the electricity going to my system by limiting the effects of other electrical devices in my home was absolutely essential for getting my system to sound its best. The reason being that improving my electricity seemed to greatly reduce the level of distortion in my system.
I still feel this way, but my views on why improving electricity helps have evolved. What I’ve come to understand, or at least understand better, is that back when I wrote that article and for a long time after, I had a lot more front-end distortion than I realized. That distortion was compounded in different ways, one of which was by way of the electricity.
Throwing breakers and unplugging appliances was and is an effective way of reducing compound distortion in my system and improving the way my records sound. But since revamping my turntable setup and learning to better control the platter speed, the improvements I hear by ameliorating the negative effects of my electricity are significantly less than they once were. In other words, with less front-end distortion there’s a lot less distortion to be compounded by bad electricity.
Robert’s Approach to Audio and Records
Robert has methodically and carefully — one might even say scientifically — approached the various problems he’s encountered in this hobby by doing the following:
- Improving his equipment,
- Teaching himself how to do a better job of dialing in his turntable setup, and
- Learning how to do controlled shootouts for his favorite albums.
- Sometimes he just has something interesting to say about records he’s been thinking about, which we are happy to reproduce as they tend to fit nicely with our own predilections along those lines. Naturally, our thinking about records has a section devoted to it here on the blog.